PL34s3 W4!t 10 S3c0nd B3f0r3 D0wnL04d

Deepa M sand machine is a HSI specially designed to produce sand from -40 mm size aggregates. DEEPA SAND MACHINE is unique since its productivity is high, consuming less power and can be readily installed in a small/ medium size crusher unit or Quarry site. -40 mm Quarry Spalls, quarry waste like withered surface rock and whatever material is not readily marketable in a crusher unit can be profitably converted into sand in DEEPA SAND MACHINE.

M Sand Machine Manufacturer from Coimbatore DEEPA SAND MACHINE features a combination of heavy dynamically balanced rotor design,weir material and crushing chamber design. this combination has turned out revolutionary, improved production and product quality and reduced operating and wear cos. just feed the materials at a steady uniform rate to the full width of rotor. Controlled accelerated uniform feeding enhances the momentum of feed materials and get crushed by highly intensive impacts imparted by the quick rotational movement of blow bars fixed to the rotor. the particles produced are then further crushed as they collide against each other producing a finer cubical shaped products.

The cubical shaped sand fines enhances the quality and strength of concrete with saving in cement, bitumen savings in asphalt and high quality blocks.

Deepa Horizontal Shaft Impactors are of robust welded construction,stress relieved and can be assembled/serviced easily and quickly. The impactors internal hull is fully layered with wear resisting lining plates.

The body is of three parts- bottom housing, a top housing in two halves; front top feeding side and rear top with impact arms. Front and rear top housings are hinged so it can be opened for maintenance through a hydraulic system.

The rotor shaft is mounted on a heavy duty double row self aligning spherical roller bearings, in the bottom housing. Dynamically balanced to eliminate vibrations and stresses. Rotor discs are strengthened by wear resistant toughening process.

The blow bars are of heavy wear resistant special alloy steel. Blow bars can be easily removed and assembled on to rotor discs and reversed when top side is wornout.The space set between the blow bar and the impact arm determines the size and quality of out-put. This space can be easily adjusted to the desired gap setting from outside by means of adjusting screw.

The impact arms are provided within heavy quality alloy steel castings. Its position can be easily adjusted, and the gap setting at the top and bottom can seen through inspection door on the sides. Easier to operate & maintain: even by unskilled personnel. Feed to the full width of the opening: just guard the against tramp iron/other foreign materials getting into the machine. So simple yet very very very sturdy heavy machine that mills the rock into sand fines in seconds. M Sand Machine Manufacturer from Coimbatore

Horizontal Shaft Impact Crusher is an Impactor designed for the specific application of sand production. It is unique as its productivity is high consuming less power to crush aggregates of size up to 40 mm into sand fines. So it is more profitable.

It is easy to install in any small or medium crushing plant or any quarry site. All existing crusher units can easily add or switchover to sand production by installing Deepa Horizontal Shaft Impact Crusher. For this reason, Deepa Horizontal Shaft Impact Crusher is rightly known among the users and public at large as Deepa Sand Machine.

Deepa Horizontal Shaft Impactors are distinctly different from conventional VSI in that the feed materials have a high momentum caused by accelerated feeding and the high intense impact imparted by the high speed rotor results in much higher production of sand fines. The gap setting between the blow bar and the impact plates can be kept at minimum to achieve a high percentage of fine sand. These features are not available in VSI.

Deepa Horizontal Impact Crushers of robust welded construction, stress relieved and can be assembled and serviced easily. The impactors internal hull is fully layered with wear resistant lining plates.

The body is of three parts-bottom housing, a top housing in two halves, front top feeding side and rear top with impact arms. Front and rear top housings are hinged so that it can be opened for maintenance through a hydraulic system.

The body is of three parts-bottom housing, a top housing in two halves, front top feeding side and rear top with impact arms. Front and rear top housings are hinged so that it can be opened for maintenance through a hydraulic system.

Features: Deepa HSI Crushers are simple yet sturdy, and mills rock into sand fines in seconds. Robust welded construction, stress relieved and can be assembled and serviced easily. Dynamically balanced to eliminate vibrations and stresses. Rotor discs are strengthened by wear resistant toughening process. The impact arms are provided with heavy high quality alloy steel castings.